Stone Coated Steel Roofing Colleyville TX Homes Are Built For
Why look at stone coated steel roofing? Colleyville, TX homes are larger, the lots are bigger and the rooflines are more complicated than in most of the Mid-Cities. A roof on a 4,000-plus square foot custom home with multiple gables, turrets and steep front elevations is a major expense. Replacing it every 12 to 18 years after hail is a much bigger one. Stone coated steel gives you the look of tile, slate, shake or dimensional shingles on a steel core that carries a Class 4 impact rating and is expected to last 40 to 70 years. Stone Coated Roofs installs these systems throughout Colleyville, from the estates off Pleasant Run and Glade Road to neighborhoods along John McCain and Hall-Johnson.
Why Roofs Take a Beating in Colleyville
Colleyville sits in northeast Tarrant County, just west of DFW Airport, in the middle of one of the most active hail corridors in the country. Tarrant County has a long hail history. The Mayfest storm that struck Fort Worth on May 5, 1995 is still one of the most cited hail events in Texas, and spring storms continue to roll across the county most years, typically between March and June.
Three things make large custom roofs particularly vulnerable:
- Surface area. A big, complex roof simply catches more hail, and every valley, hip and ridge is a place where damage concentrates.
- Steep pitches. Steep slopes on the front of many Colleyville homes look great but make repairs harder and more expensive, so each repair cycle costs more.
- Heavy materials. Concrete and clay tile are common on Colleyville's Mediterranean and Tuscan homes. Tile can crack under hail and is heavy, so replacing it like-for-like keeps a lot of weight on the framing.
Replacing Tile With Stone Coated Steel
One of the most common Colleyville projects is converting a concrete or clay tile roof to a stone coated steel tile profile. The look stays close to the original. The weight drops dramatically.
| Material | Approximate weight (lb per sq ft) |
|---|---|
| Stone coated steel | About 2.4 |
| Concrete tile | 9 to 10 |
| Clay tile | 8 to 12 |
On a large roof, that difference can add up to many tons removed from the structure. Our roof weight calculator lets you estimate the change for your own roof size. Lighter weight also means less stress on rafters and trusses over time, and broken tiles stop being a recurring repair. For a fuller comparison, read stone coated steel vs. concrete tile.
Replacing cedar shake
Some older Colleyville homes, especially on larger wooded lots, were built with cedar shake. Wood shake weathers quickly in North Texas heat, splits under hail and raises fire concerns. A stone coated shake profile keeps the rustic texture while adding a Class A fire rating and Class 4 impact resistance.
Colleyville Stone Coated Steel Roofing Profiles
Colleyville stone coated steel roofing can be matched to nearly any architectural style in the city. Stone Coated Roofs installs every leading brand, including Decra, Roser, TEK, Tilcor, Boral (Westlake Royal), Gerard, Metro, Allmet and Unified Steel, which gives you a wide range of colors and textures to choose from.
- Tile profiles for Mediterranean, Tuscan and Spanish Colonial homes. See our stone coated tile roofs page.
- Slate profiles for French Country, European and stately traditional homes. See our slate-look stone coated roofs page.
- Shake profiles for Hill Country, ranch and rustic designs.
- Shingle profiles for classic brick traditional homes.
Because the color is in the stone granules rather than a painted surface, it holds up well under Texas sun. Many homeowners choose blended color tones that mimic the natural variation of real slate or weathered wood.
Stone Coated Metal Roofing Colleyville TX: Installation Details
Stone coated metal roofing in Colleyville, TX is usually installed one of two ways:
- Batten systems fasten panels to wood battens over the deck. The air space reduces heat transfer into the attic and is typical for tile and shake profiles. On a large home with a big attic, that can make a noticeable difference in summer.
- Direct-to-deck systems fasten panels to the deck over underlayment. These are common for shingle and some slate profiles where a lower, cleaner profile is wanted.
Complex roofs need careful detailing. Turrets, curved sections, dormers, chimneys and skylights all require custom flashing and trim. Before we start, we walk the roof, document every penetration and transition, and put the plan in writing so you know exactly how each area will be handled.
Many Colleyville neighborhoods have deed restrictions or HOAs with architectural review. We prepare the spec sheets, color samples and impact and fire ratings your committee will ask for, and we wait for written approval before scheduling.
What It Costs, and What It Saves
As a planning range, stone coated steel installed in Texas runs $10 to $18 per square foot. Colleyville projects often fall in the middle to upper part of that range because of roof size and complexity. Tile tear-offs also take more labor than shingle tear-offs. Use our stone coated roof cost calculator to get a ballpark for your roof.
The savings come from not doing it again. If an asphalt roof lasts 12 to 18 years in Texas, a stone coated steel roof can outlast several of them. Insurance can help too. Many Texas carriers offer discounts for UL 2218 Class 4 roofs, commonly 5% to 25% depending on the carrier. On a higher-value Colleyville home, a premium discount can be meaningful over the years. Our Class 4 insurance discount guide explains how to ask your agent.
Pool Houses, Guest Quarters and Outbuildings
Many Colleyville properties have more than one roof. Pool cabanas, detached garages, guest houses, covered outdoor kitchens and barns on the larger acreage lots all take the same hail as the main house, and they often end up mismatched after years of separate repairs. Replacing them at the same time as the main roof keeps the color and profile consistent across the property and puts every structure on the same long-life, Class 4 system.
Low-slope sections, such as porch roofs or connectors between buildings, may need a different material where the pitch is too shallow for stone coated panels. We identify those areas during the inspection and detail the transitions so they look intentional and shed water correctly.
Living With a Stone Coated Steel Roof
Once it is installed, a stone coated steel roof asks very little of you. There are no tiles to crack, no shakes to split and no shingle tabs to reseal. Walking on tile roofs to service HVAC equipment, satellite dishes or holiday lighting is a common source of broken tiles in Colleyville; properly installed steel panels handle foot traffic far better when walked correctly. A yearly look at gutters, valleys, flashing and sealant around penetrations, plus a check after any major storm, covers most of it. Our roof maintenance checklist and log makes it easy to track.
When Hail Hits Colleyville
After a major storm, storm-chasing crews flood northeast Tarrant County. On a high-value home, a rushed or poorly detailed roof is an expensive mistake. Document the damage, contact your insurer and get a thorough inspection. If your claim covers replacing the roof, ask about paying the difference to upgrade to stone coated steel so the next storm is far less likely to start the process over. Our roof replacement after hail guide walks through the steps.
Serving Colleyville and Northeast Tarrant County
Stone Coated Roofs works throughout Colleyville along SH 26, Glade Road, Pool Road and the SH 121/183 corridor, and in nearby cities including Southlake, Grapevine, Keller, Bedford, Euless, Hurst and North Richland Hills.
If you are ready to see what a tile, slate or shake profile would look like on your home, call +1 (512) 297-7580 or request a free estimate. We will inspect the roof, measure it and give you a written proposal.